trigger trigger
    Country websites:

    Attention

    The medical device and therapy related information on this website is aimed exclusively at healthcare professionals.

    Not all products are cleared or available for sale in all Asia Pacific countries.

    By clicking on the button "Accepted and Confirmed" you assure that you have taken note of this information and that you are a healthcare professional.

    Dialysis water supply at a glance

    In order to ensure the required quality of fluids, our product range includes a variety of systems for different purification stages, such as reverse osmosis systems. The right system can be assembled based on personal preferences and local requirements.

    AquaA Product Group

    Our innovation meets your evolving needs

    AquaA

    AquaA is the advanced system for permeate preparation in dialysis center and provides a permeate capacity up to 4,000 l/h.

     

    Advantages of the AquaA:
    Integrated sample ports for quality assurance procedures
    Integrated control system before and during dialysis operation
    Energy and water saving operation
    Remote control
    Emergency operation
    Prepared for integration into dialysis and hospital IT management systems

    AquaA2

    AquaA2 is an additional (2nd stage) reverse osmosis module for the AquaA designed to meet higher permeate quality of a modern dialysis center.

     

    Advantages of the AquaA2:
    Full redundancy
    Higher permeate quality
    In case of emergency can be operated as a stand-alone unit

    AquaHT

    AquaHT is a hot water disinfection module designed to be integrated into the AquaA product group. It enables the heat disinfection of the both modules AquaA and AquaA2.

     

    Advantages of the AquaHT:
    Integrated heat disinfection of up to 40 HD machines in parallel
    Heat disinfection is performed automatically and is documented by the system as specified by ISO 26722:2009
    AquaHT permits continuous disinfection: a thermal disinfection of the permeate ring can be followed by a subsequent disinfection of the RO membranes

    AquaUF

    AquaUF is an ultrafiltration module for higher permeate quality.

     

    Advantages of the AquaUF:
    Increased permeate quality
    Removal of micro-organisms, bacteria and viruses
    Heat disinfection of ultrafiltration module
    Bypass possibility
    High chemical resistance, double-layered

    AquaBplus Product Group

    The right fit for your budget

    AquaBplus

    AquaBplus is a basic module for permeate preparation in the dialysis center.

     

    Advantages of the AquaBplus:
    Sensors and hydraulic systems are controlled by integrated functional test routines
    User-friendly interface
    Upgradable by a range of options
    Network connectivity

    AquaBplus B2

    AquaBplus B2 is the second stage of AquaBplus product group. It is designed to meet the needs and quality standards of a modern dialysis center.

     

    Advantages of the AquaBplus B2:
    Both stages can be operated together or individually (for redundancy or higher permeate quality)

    AquaBplus HF

    AquaBplus HF allows hot disinfection of the permeate loop, dialysis unit tubing and the dialysis units itself.

     

    Advantages of the AquaBplus HF:
    Sequential disinfection of up to five HD machines
    Can be retrofitted
    Reduction of biofilm formation by permeate ring and connected user points without additional chemical disinfection
    Continuous monitoring of temperature

    AquaC Product Group

    When independence matters

    AquaC UNO H

    AquaC UNO H provides a thermal disinfectable single patient RO.

     

    Advantages of the AquaC UNO H:
    Significant risk reduction by using hot water instead chemicals for disinfection
    Heat disinfection of the membrane and the ring
    Interface heat disinfection in combination with FME HD device 5008/5008S
    Automated data logging and monitoring
    Network connection
    Start / Stop communication with HD-device
    Low noise emissions
    Ring main length up to 10 m

    AquaUNO

    AquaUNO is a mobile single patient reverse osmosis model.

     

    Advantages of the AquaUNO:
    Automatic rinse cycles
    Monitoring of cleaning cycles
    Start / stop communication with HD-device
    Low noise emissions

    High flexibility – Optional porters for AquaC UNO H and AquaUNO

    • Porter S - Fresenius Medical Care

      Porter S

    • Porter S with single pre filter - Fresenius Medical Care

      Porter S with single pre filter

    • Porter S with double pre filter - Fresenius Medical Care

      Porter S with double pre filter

    • Porter standard - Fresenius Medical Care

      Porter standard

    • Porter extended - Fresenius Medical Care

      Porter extended

    AquaWTU

    AquaWTU is a complete reverse osmosis water treatment system designed to supply up to 5 dialysis machines. The complete system is housed and comprises pre-treatment and reverse osmosis.

     

    Advantages of the AquaWTU:
    Production of dialysis permeate from drinking water
    Automatic rinse cycles
    Programmable start / stop function
    User-friendly interface
    Integrated pre-filtration including softener

    Related Content

    Concentrate supply
    Concentrate supply

    Reliable preparation and supply of acid concentrate.

    Media supply
    Media supply

    Delivery of dialysis media to the point of care in a clean and organized manner.

  • News

    See all news

  • Healthcare Professionals

  • Media center

    Media Center

    3 Decades of Continuous Improvement

    Media Center

    Pen and paper – words from the heart

    Media Center

    Looking Out for Each Other

    Go to our media center

  • Contact

    Country websites

    All contact information
    • PreviousNext
    © Fresenius Medical Care Asia Pacific Limited